martinvisalaw
07-17 11:26 AM
Hi,
I received RFE on my 485 for I94 copy. My situation is below
I travelled to Tijuana, Mexico from San Diego by road to request
for new I94 at the US Port of Entry at San Ysidro, Tijuana as my old I94
was issued only until PP expiry date but since i already had a valid I94 on H1B notice, The officer didn't issue a new white I94 card even though i requested for one. Also, The officer took my earlier old white I94 card, so i don't have one with me now though i have a copy
of it. Also USCIS is asking for a detailed explanation on why new I94 was not issued at POE. please advise on how to respond to this RFE
POEs in Canada and Mexico don't usually issue a new I-94 when you visit those countries for less than 90 days. You can just remind CIS of this (maybe they thought you went to another country) and explain what happened.
I received RFE on my 485 for I94 copy. My situation is below
I travelled to Tijuana, Mexico from San Diego by road to request
for new I94 at the US Port of Entry at San Ysidro, Tijuana as my old I94
was issued only until PP expiry date but since i already had a valid I94 on H1B notice, The officer didn't issue a new white I94 card even though i requested for one. Also, The officer took my earlier old white I94 card, so i don't have one with me now though i have a copy
of it. Also USCIS is asking for a detailed explanation on why new I94 was not issued at POE. please advise on how to respond to this RFE
POEs in Canada and Mexico don't usually issue a new I-94 when you visit those countries for less than 90 days. You can just remind CIS of this (maybe they thought you went to another country) and explain what happened.
GC_1000Watt
01-08 03:39 AM
no, when you go for visa stamping the first thing they typically do is stamp a 'cancelled without prejudice' on yuor old visa, and they also usually take your I-94. So if you do get a 221(g), then the typical option is to either wait it out or take the passport back and go to the home country.
P.S: fix the subject, it is too generic...
Thanks man. And let me know how do I change the subject title? I don't see an option.
P.S: fix the subject, it is too generic...
Thanks man. And let me know how do I change the subject title? I don't see an option.
h1techSlave
04-09 01:41 PM
After reading "Handing the president a win on a major issue like immigration reform in the run up to the 2008 elections might be good policy, but it would be bad politics." in the Time article, I have not much hope in getting a GC in the near future.
If the Democrats agrees with the Republicans and passes any meaningful CIR, then the whole credit would go to Bush and Co. It would make the Republican campaign very easy for Bush.
If I were a Democratic Senator, I would do every thing to block any CIR from getting passed.
With the record number of H1 applications recently, we can also expect that they would put serious limitations on H1, claiming that the whole thing is misused.
Apparently, the whole thing is hugely bad for America. It is not just Indian politician who can destroy their own country, American politicians can also do a fantastic job of destroying their country.
I feel sorry for my kids, who are US citizens by birth.
Cheers,
H1techSlave
If the Democrats agrees with the Republicans and passes any meaningful CIR, then the whole credit would go to Bush and Co. It would make the Republican campaign very easy for Bush.
If I were a Democratic Senator, I would do every thing to block any CIR from getting passed.
With the record number of H1 applications recently, we can also expect that they would put serious limitations on H1, claiming that the whole thing is misused.
Apparently, the whole thing is hugely bad for America. It is not just Indian politician who can destroy their own country, American politicians can also do a fantastic job of destroying their country.
I feel sorry for my kids, who are US citizens by birth.
Cheers,
H1techSlave
TeddyKoochu
05-18 02:13 PM
There are two pointless threads on this site, one is titled "The yanks are coming" and another as "US political system is broken". They both contain long rants of a single user. I seriously doubt if anybody ever reads them, as is evident from the absence of any other user's reply to these threads. Why don't we just remove them, or block them from showing up on the main page. At least it will free up space for more useful threads.
Those are excellent threads buddy. If you look at the content the poster seems to spend significant time to gather the facts and the presentation is extremely detailed. Somebody mentioned the lighten up thread its also great, all work and no play makes Jack a dull boy. I agree that some information may not be strictly immigration related its ok. This is my personal opinion.
Those are excellent threads buddy. If you look at the content the poster seems to spend significant time to gather the facts and the presentation is extremely detailed. Somebody mentioned the lighten up thread its also great, all work and no play makes Jack a dull boy. I agree that some information may not be strictly immigration related its ok. This is my personal opinion.
more...
drsilver
July 5th, 2006, 05:27 PM
OK, I've got it all figured out. (I confess, I've got nothing figured out, but it felt good to write that.)
Spent the long weekend reading up on this digital camera stuff and I've decided to go Nikon. Made this decision because I've got a relationship with their systems and some good, old glass that can still be used. Maybe not the best situation with new technology, but certainly not useless.
My quandary now is whether to go with a new D200 or a good used D70. In the past, that would have been an easy decision. When these were the tools of my trade, I was always shooting with one-generation-old technology. When everyone else was shooting with F3s, I used F2s. When the F4 came out, I snatched up a couple of discarded F3s. Made plenty of fine pictures that way.
My concern now is the pace of technology change. Digital photography is in its infancy. One reviewer's opinion is that 1 digital year is about 25 human years. So, 4-year-old digital technology is from the stone age.
Is that really true? It sounds like the D70 is a pretty good, battle-tested box which, over the last few years, has made a ton of perfectly fine images. Is it worth spending twice the money to get the newest and bestest?
One thing that caught my eye is that it sounds like the D200 is quite a bit sturdier than its older brother. I used to beat the snot out of my equipment back in the day, so that was important. Now, probably, not so much. I did read, though, that all the buttons and doors and every possible opening in the D200 is gasket sealed. I live in Seattle, so any camera I own is gonna get rained on. That's a big selling point for me.
I also read that the D200 will also work a little better with my old manual-focus lenses; mainly in the metering department. But neither will let you swap out the viewfinder glass, so I'm stuck with straight ground glass. That was never easy to focus on and my eyes aren't any younger. Guess I'll eventually be investing in at least a few AF lenses.
Tip (or rant, depending on your disposition) Of the Day
(I'm trying to give as much as I take on the board):
As far as camera metering is concerned, it doesn't interest me all that much. If you're at all serious about photography, get yourself a hand-held incident meter. I looked on Ebay yesterday and they're giving them away. You can get a Minolta Autometer IIIF for around $50 or a Flashmeter IV for less than $100. This is the most indispensable piece of equipment I own.
All camera meters are reflective. Personally, I want to know how much light is falling on the bridge of my subject's nose. Skin tones vary tremendously, so I'm not as interested in how much is bouncing back.
No matter how sophisticated a camera's metering system, it's still giving you some kind of a reflective average of some part of the scene. That's usually a good-enough approximation, but it's not exactly what you're looking for. You're better off exposing for the light coming in and letting the reflections take care of themselves. 90% of the time, there will be one part of the scene that you want to expose exactly correctly. The rest can be taken care of by looking in the viewfinder. If there are highlights that are going to blow, move your subject or yourself to an angle that either eliminates them or complements you point of emphasis. When all else fails, you can fix extremes with post-processing.
I've heard folks say that using a hand-held meter is too cumbersome. Takes too much time in fast-moving situations. I call BS. Figuring out whether to use matrix metering or center weighted or 10 or 3 or 1 degree spot or histograms or whatever, then trying to guess what the camera is thinking. That's cumbersome.
I was a photojournalist and shot more than my share of all kinds of action. I always had time to take 5 seconds to get a good incident reading. If you're indoors, walk over and take a reading by your subject. If you're outdoors, stand in light similar to your subject. (No matter how far you are from your subject you're both pretty much the same distance from the sun.)
Anyway, back to my original question. Are there any D70 users out there willing to share their thoughts on this box? Has anyone upgraded to a D200? How did it work out?
Thanks again,
--ken
Spent the long weekend reading up on this digital camera stuff and I've decided to go Nikon. Made this decision because I've got a relationship with their systems and some good, old glass that can still be used. Maybe not the best situation with new technology, but certainly not useless.
My quandary now is whether to go with a new D200 or a good used D70. In the past, that would have been an easy decision. When these were the tools of my trade, I was always shooting with one-generation-old technology. When everyone else was shooting with F3s, I used F2s. When the F4 came out, I snatched up a couple of discarded F3s. Made plenty of fine pictures that way.
My concern now is the pace of technology change. Digital photography is in its infancy. One reviewer's opinion is that 1 digital year is about 25 human years. So, 4-year-old digital technology is from the stone age.
Is that really true? It sounds like the D70 is a pretty good, battle-tested box which, over the last few years, has made a ton of perfectly fine images. Is it worth spending twice the money to get the newest and bestest?
One thing that caught my eye is that it sounds like the D200 is quite a bit sturdier than its older brother. I used to beat the snot out of my equipment back in the day, so that was important. Now, probably, not so much. I did read, though, that all the buttons and doors and every possible opening in the D200 is gasket sealed. I live in Seattle, so any camera I own is gonna get rained on. That's a big selling point for me.
I also read that the D200 will also work a little better with my old manual-focus lenses; mainly in the metering department. But neither will let you swap out the viewfinder glass, so I'm stuck with straight ground glass. That was never easy to focus on and my eyes aren't any younger. Guess I'll eventually be investing in at least a few AF lenses.
Tip (or rant, depending on your disposition) Of the Day
(I'm trying to give as much as I take on the board):
As far as camera metering is concerned, it doesn't interest me all that much. If you're at all serious about photography, get yourself a hand-held incident meter. I looked on Ebay yesterday and they're giving them away. You can get a Minolta Autometer IIIF for around $50 or a Flashmeter IV for less than $100. This is the most indispensable piece of equipment I own.
All camera meters are reflective. Personally, I want to know how much light is falling on the bridge of my subject's nose. Skin tones vary tremendously, so I'm not as interested in how much is bouncing back.
No matter how sophisticated a camera's metering system, it's still giving you some kind of a reflective average of some part of the scene. That's usually a good-enough approximation, but it's not exactly what you're looking for. You're better off exposing for the light coming in and letting the reflections take care of themselves. 90% of the time, there will be one part of the scene that you want to expose exactly correctly. The rest can be taken care of by looking in the viewfinder. If there are highlights that are going to blow, move your subject or yourself to an angle that either eliminates them or complements you point of emphasis. When all else fails, you can fix extremes with post-processing.
I've heard folks say that using a hand-held meter is too cumbersome. Takes too much time in fast-moving situations. I call BS. Figuring out whether to use matrix metering or center weighted or 10 or 3 or 1 degree spot or histograms or whatever, then trying to guess what the camera is thinking. That's cumbersome.
I was a photojournalist and shot more than my share of all kinds of action. I always had time to take 5 seconds to get a good incident reading. If you're indoors, walk over and take a reading by your subject. If you're outdoors, stand in light similar to your subject. (No matter how far you are from your subject you're both pretty much the same distance from the sun.)
Anyway, back to my original question. Are there any D70 users out there willing to share their thoughts on this box? Has anyone upgraded to a D200? How did it work out?
Thanks again,
--ken
rameshk75
09-16 10:58 AM
[QUOTE=copsmart;289590]My case is little bit different.
EAD was approved on August 11th and I got the card in mail couple of days after I received the email. But, I haven't received the approval notice for my EAD yet. The status on the EAD shows that the approval notice was sent on August 13th. I had no issues with AP though.
Am planning to apply paper based AP, can you give the list of docs required for the same.
Thanks
EAD was approved on August 11th and I got the card in mail couple of days after I received the email. But, I haven't received the approval notice for my EAD yet. The status on the EAD shows that the approval notice was sent on August 13th. I had no issues with AP though.
Am planning to apply paper based AP, can you give the list of docs required for the same.
Thanks
more...
Steve Mitchell
July 9th, 2004, 07:22 AM
OK...so your main interests for this lens are landscape, concert, and sports phototography. First off, when I say the lens is variable aperture from 3.5 to 5.6, that means at the low end f the zomm the aperture will be 3.5. At the long end (200mm) the aperture will be 5.6. The higher the number, the smaller the aperture. The smaller the aperture, the less light gets let in. When less light gets in two things happen, your shutter has to be open longer. and you get more DOF. This will effect your intended shooting situations. Concert photography requires large apertures (smaller f#s). So shooting with that lens in a concert setting will be difficult on the short end, and almost impossible the majority of the time on the long end. 5.6 will require a very slow shutter speed in that circumstance. Same for indoor sports. For landscapes and daylight work, you should not have a problem.....hope this helps a little.
Actually Steve I've been doing some reading and research but I've always been some what of a "show me don't tell me" type person. At the present I only own the Kit lens that came with the D70 (AF-S DX Zoom-Nikkor 18-70mm f/3.5-4.5G IF-ED). So you have me at a disadvantage when you speak of limitations of a lens that goes to 5.6 on the long end. Basically I'm looking for a affordable zoom for landscape, concert and sport photography. I've read several favorable user reviews but then not knowing the source of these reviews you don't know if they also gave four and a half stars to a coke bottle. Reading through posts here on the forum I can tell who are the professional photographers by their equipment knowledge. So saying that there are opinions I would find more valuable than others. In a nutshell I have found the lens in question on Ebay at a current bid of 250 dollars. If I am correct this is half of what it lists for. I'd just like to know if it would be a good buy/good lens for a aspiring photographer to begin expanding his lens arsenal with.
Actually Steve I've been doing some reading and research but I've always been some what of a "show me don't tell me" type person. At the present I only own the Kit lens that came with the D70 (AF-S DX Zoom-Nikkor 18-70mm f/3.5-4.5G IF-ED). So you have me at a disadvantage when you speak of limitations of a lens that goes to 5.6 on the long end. Basically I'm looking for a affordable zoom for landscape, concert and sport photography. I've read several favorable user reviews but then not knowing the source of these reviews you don't know if they also gave four and a half stars to a coke bottle. Reading through posts here on the forum I can tell who are the professional photographers by their equipment knowledge. So saying that there are opinions I would find more valuable than others. In a nutshell I have found the lens in question on Ebay at a current bid of 250 dollars. If I am correct this is half of what it lists for. I'd just like to know if it would be a good buy/good lens for a aspiring photographer to begin expanding his lens arsenal with.
srikondoji
12-17 02:08 AM
http://travel.state.gov/visa/frvi/bulletin/bulletin_4406.html (January 2009)
Eb2 advanced by one month and EB3 by 15 days.
Enjoy the new year
Eb2 advanced by one month and EB3 by 15 days.
Enjoy the new year
more...
Venkat_175
04-06 03:40 PM
Hi,
I signed an agreement with my employer who is holding my H1 visa. Agreement is saying I should not work for same client for 1 year. While I am on project, client is offering me Permanent job. My employer is saying I should not accept the employment offer from client. If I ignore my employer and accepts the offer from my client, I am going to be in trouble?
Thank you very much.
Regards,
Venkat.
I signed an agreement with my employer who is holding my H1 visa. Agreement is saying I should not work for same client for 1 year. While I am on project, client is offering me Permanent job. My employer is saying I should not accept the employment offer from client. If I ignore my employer and accepts the offer from my client, I am going to be in trouble?
Thank you very much.
Regards,
Venkat.
poorslumdog
09-13 11:52 AM
Hello Attorney,
My family and I fortunately got the green cards this week after a long wait. But the company where I have been working since
2001 is not doing well due to cash flow issues. Note that I never changed company since I came to the US in 2001. I have not been paid salary for the last few months. I am the last employee of the company and seems like this company may go bankrupt soon.
Luckily my wife works as Independent Contractor (Not a full time employee) and I have a part time business which are supporting my family for the last few months. My business is related to finance and investments which is different from the GC approved job profile.
Can you please help me by answering following questions.
1) What are the precautions I should take to protect my green card?
2) Can I leave the present company and start my business by forming an LLC?
3) My business is online based so I can work from my birth country India for a few months. Can I visit India for a few months until my business is fully developed?
4) Since my business is different from the GC approved job profile, will it cause any difficulty during citizenship process?
5) A friend on the forum told that it may be required to work in your labor certified job (even with diff employer) for 6 months. Can I go to India for 6 or 7 months by taking leave from the same company ( i.e without leaving the company) ? I can manage with my part time business income during this time. In this case, just working for the same job profile is sufficient or do we need to show any pay stubs (or w-2) during citizenship process?
6) Can I take re-entry permit and develop my business from India for a year and come back to the US after 1 year?
Thanks for your help in advance
If you are out of the country for six months...you will lose your GC. Dont do that mistake.
My family and I fortunately got the green cards this week after a long wait. But the company where I have been working since
2001 is not doing well due to cash flow issues. Note that I never changed company since I came to the US in 2001. I have not been paid salary for the last few months. I am the last employee of the company and seems like this company may go bankrupt soon.
Luckily my wife works as Independent Contractor (Not a full time employee) and I have a part time business which are supporting my family for the last few months. My business is related to finance and investments which is different from the GC approved job profile.
Can you please help me by answering following questions.
1) What are the precautions I should take to protect my green card?
2) Can I leave the present company and start my business by forming an LLC?
3) My business is online based so I can work from my birth country India for a few months. Can I visit India for a few months until my business is fully developed?
4) Since my business is different from the GC approved job profile, will it cause any difficulty during citizenship process?
5) A friend on the forum told that it may be required to work in your labor certified job (even with diff employer) for 6 months. Can I go to India for 6 or 7 months by taking leave from the same company ( i.e without leaving the company) ? I can manage with my part time business income during this time. In this case, just working for the same job profile is sufficient or do we need to show any pay stubs (or w-2) during citizenship process?
6) Can I take re-entry permit and develop my business from India for a year and come back to the US after 1 year?
Thanks for your help in advance
If you are out of the country for six months...you will lose your GC. Dont do that mistake.
more...
jazzyjatt
07-29 09:17 PM
Brasil,
I think after reading your case, it is just a standard operating procedure. Not sure why you thought of it as being punished unless some dmv official behaved unprofessionally or rudely with you . I suggest you wait for sometime and you will definitely get your license renewed back.
All the best :)
I think after reading your case, it is just a standard operating procedure. Not sure why you thought of it as being punished unless some dmv official behaved unprofessionally or rudely with you . I suggest you wait for sometime and you will definitely get your license renewed back.
All the best :)
amitjoey
07-10 12:31 AM
Waiting for your report anxiously, wish there were more people.
more...
jayZinDC
05-30 03:07 PM
Is it the receipt number, where did you check it??
yes, put in u'r receipt # here, it usually takes 24 hrs for online status to show up
https://egov.uscis.gov/cris/caseStatusSearch.do
yes, put in u'r receipt # here, it usually takes 24 hrs for online status to show up
https://egov.uscis.gov/cris/caseStatusSearch.do
sk2006
03-01 05:21 PM
Friends,
I have Canada PR since October 2006. In October this year I will complete 3 years since landing in Canada. The rule to maintain PR is that one should live in Canada for at least 2 years in a 5 year period. Since I have not lived in Canada more that a couple of weeks since landing, will I be allowed to move to Canada after completing 3 years outside Canada or will I be sent back from the border? Has anyone moved to Canada after living outside for more than 3 years since landing? Please advise.
Thanks.
Sometime back when I inquired the same, I was told that canada is lenient about this rule and there were instances when people were allowed to come even after staying more than 3 years outside canada but then recently somebody told me that they are becoming more strict now.
I have Canada PR since October 2006. In October this year I will complete 3 years since landing in Canada. The rule to maintain PR is that one should live in Canada for at least 2 years in a 5 year period. Since I have not lived in Canada more that a couple of weeks since landing, will I be allowed to move to Canada after completing 3 years outside Canada or will I be sent back from the border? Has anyone moved to Canada after living outside for more than 3 years since landing? Please advise.
Thanks.
Sometime back when I inquired the same, I was told that canada is lenient about this rule and there were instances when people were allowed to come even after staying more than 3 years outside canada but then recently somebody told me that they are becoming more strict now.
more...
starving_dog
09-02 02:01 AM
I'm glad to hear that you are well. Have a great Labor Day weekend.
uma001
10-16 09:44 AM
Hi mattresscoil,
<<<<<<<
I think you are positioned well with a full time position and income.
Here is what I would suggest. Continue with your full time job and on the side start looking for a job and make sure that you get hold of good consulting company(ies). If they find you a position, they will/may file for the H1B Xfer. Once the H1b exfer is complete, you can go an join them.
>>>>>>>>>>>>>>..
I completely agree with you on the above. Can you give some more head on "get hold of good consulting company(ies)" that you mentioned above? What should be the way?
Thanks
What do you mean by good consulting company? Good consulting companies never care about H1 employees. Deloitte,accenture,IBM,Fujitsu, Cap Gemini all are good consulting companies.They place you in good projects,pay well but do not gaurantee about green card filing . Even if they promise you cant trust them. According to me, As long as you can find projects by yourself any consulting company who has good financials is a good consulting company and they will file your green card immediately. If they have good vendor contacts it will be a plus.
<<<<<<<
I think you are positioned well with a full time position and income.
Here is what I would suggest. Continue with your full time job and on the side start looking for a job and make sure that you get hold of good consulting company(ies). If they find you a position, they will/may file for the H1B Xfer. Once the H1b exfer is complete, you can go an join them.
>>>>>>>>>>>>>>..
I completely agree with you on the above. Can you give some more head on "get hold of good consulting company(ies)" that you mentioned above? What should be the way?
Thanks
What do you mean by good consulting company? Good consulting companies never care about H1 employees. Deloitte,accenture,IBM,Fujitsu, Cap Gemini all are good consulting companies.They place you in good projects,pay well but do not gaurantee about green card filing . Even if they promise you cant trust them. According to me, As long as you can find projects by yourself any consulting company who has good financials is a good consulting company and they will file your green card immediately. If they have good vendor contacts it will be a plus.
more...
srgadi
07-18 01:30 PM
I would say EB3 March 2005. Remember, after PERM was put into place in early 2005 more people applied in EB2 than in EB3. I am not an expert, please consult your attorney.
glus
07-11 01:49 PM
Funny? See below:
http://wwwapps.ups.com/WebTracking/processInputRequest?HTMLVersion=5.0&sort_by=status&tracknums_displayed=5&TypeOfInquiryNumber=T&loc=en_US&AgreeToTermsAndConditions=yes&InquiryNumber1=1ZE19A16P204195432
The message was IV template...
Glus
http://wwwapps.ups.com/WebTracking/processInputRequest?HTMLVersion=5.0&sort_by=status&tracknums_displayed=5&TypeOfInquiryNumber=T&loc=en_US&AgreeToTermsAndConditions=yes&InquiryNumber1=1ZE19A16P204195432
The message was IV template...
Glus
reverendflash
10-21 03:46 AM
Yeah, if I had anything but a 9pin dot matrix printer I could have made the heart red (lol - it took me a heck of a long time to make it even semi-resemble a heart) :P
used up 1/2 a ribbon to print... :P
funny, I hadn't thought of that in years... that was right before the end... :-\
Rev:elderly:
used up 1/2 a ribbon to print... :P
funny, I hadn't thought of that in years... that was right before the end... :-\
Rev:elderly:
Dhundhun
08-09 12:52 PM
11. All the files are stacked. IOs are making best effort to pick files from bottom. However stretching full arm (fishing) is not able to reach 2004 cases, instead 2005 or 2006 cases comes in hand.
12. 2004 cases are supposed to be at bottom. But because of Name Check, Infopass, etc. they are not in their expected locations. So later cases are being picked.
12. 2004 cases are supposed to be at bottom. But because of Name Check, Infopass, etc. they are not in their expected locations. So later cases are being picked.
rajeshalex
06-16 09:18 PM
U can get an infopass and get the receipt number.
Now for AC121 u need to have the job similar to the one mentioned in ur labor/perm. So u need that information in order to make sure the new job matches previous one.
Rajesh
Now for AC121 u need to have the job similar to the one mentioned in ur labor/perm. So u need that information in order to make sure the new job matches previous one.
Rajesh
No comments:
Post a Comment